Review of Spray Lining & Coatings Dealership Opportunities

International Graco, PMC, Wiwa, SL&C new and used equipment under warranty with loaned systems for single use jobbing.

  1. Any/all polyurea types, all brands are implemented, spray-able through all systems worldwide. HP, LP, airless, all hoppers, all cartridge systems, power rollers; SLC buys and sells major brand equipment and parts.
  2. Major polyurethane types, acrylics, epoxies, all hybrids/elastomeric types.
  3. Ship Jumpers: Name brand bedliner dealerships get duplicated formulas.
  4. DIY Crossovers: The % of contractors & handy people who get coatings, polyurea, borrow equipment, then become dealers.
  5. Professional Applicators and Large End Users: Lowest prices on elastomeric or general coatings for specialized, unique or large one-time jobs.

Most Popular SLC Equipment:

Graco E-XP1 / E-XP2

Price Range: $24,000.00 – $31,000.00

The Graco E-XP1 and E-XP2 are now High Pressure Proportioning units for Polyurethane/Polyurea with Aliphatic Systems. They are overall performance plural component spray equipment designed to process any 1:1 ratio spray-on lining, coatings system for truck beds, smaller, or large mobile applications. *

NOTE:  Used by general polyurea applicators, SL&C dealers, and most bedliner type jobbing.

** Loaned on smaller orders; included in large orders with training. **

Graco E-30

Price Range: $27,000.00 – $34,000.00

The Graco E-30 is a High Pressure Proportioning Unit with your choice of either 10.2 kw or 15.3 kw of Heating Power for Polyurethane/Polyurea same systems. Also a high performance plural component spray machine designed to process (usually) 1:1 ratio spray-in lining system for larger jobs. *

NOTE:  Used by general polyurea applicators, SL&C dealers, and most bedliner type jobbing.

** Loaned on smaller orders; included in large orders with training. **

Graco E-20

Price Range: $25,000.00 – $32,000.00

The Graco E-20 is a High Pressure Proportioning Unit with 6 kw of Heating Power as above. It is lower priced processing same sprayed lining coating for truck beds or areas of 3000 sq ft or less. *

NOTE:  Used by general polyurea applicators, SL&C dealers, and most bedliner type jobbing.

** Loaned on smaller orders; included in large orders with training. **

Graco E-10

Price Range: $19,000.00 – $23,000.00

The Graco E-10 is simplest Low or High Pressure Proportioning Unit with 2 kw of Heating Power for same formulas. It’s usually used for truck beds, small trailers, Jeeps, boats, and small applications under 1000 sq ft. It is capable of generating 2000 psi spray pressure to accurately mix and spray fast-setting systems. *

NOTE:  Used by similar, but smaller volume applicators.

** Loaned on smaller orders; included in large orders with training. **

SLC Backpack

Price Range: $1,800.00 – $2,600.00

SL&C Backpack system is fed by automatic (1:1 to 4:1 variable ratio control valve) or any manual mix, 1 stage coatings. Backpack is the SL&C solution to higher priced systems.

Multiple tips allow any/all viscosity lining and coatings.

NOTE:  Included or loaned with various orders.

High Quality LP Hoppers SLC1

Price Range: $36.00 – $131.00

Uses any manual mixed polyurea, bedliner, or coating.

Requires small to medium air compressor 6+ GPM @ 75 PSI.

NOTE:  Included or loaned with various orders.

Professional HP Hoppers SLC2

Price Range: $184.00 – $266.00

Uses any manual mixed polyurea, bedliner, or coating.

Requires medium to large air compressor 14+ GPM @ 90 PSI.

NOTE:  Included or loaned with various orders.

Do it all SLC3

Price Range: $2,200.00 – $4,100.00

Priced Lower than Graco. Uses any manual mixed polyurea, bedliner, or coating.

Fluid compressor included. Similar air compressor also is used to atomize spray.

** Loaned on smaller orders; included in large orders with training. **

Professional Series Power Roller

Price Range: $190.00 – $480.00

Roll easy with pressurized SL&C rolling system (all Graco parts) for all poly, epoxy, acrylic, or polyaspartic coatings.

** Loaned or included in roll-on shipments. **

SL&C Cartridge Systems

Price Range: $390.00 – $940.00

With access to manufacturers of all, you get any/all cartridge types or equipment for lower price. Recommended for small jobs only! Cartridge cost $19-$29 per cartridge dependent on size (.75L – 2L) and color.

** Loaned or included in spray-on shipments. **

* All plural component proportioner equipment including E-XP1, E-XP2, E-10, E-20, E-30, and larger equipment notwithstanding most or all Graco, Glascraft, PMC, Wiwa, and SL&C do operate with most any ratio formula. Other coating types besides elastomeric polyurea are applied also through these models. SL&C and Graco trained technicians make these adjustments, have the manuals, knowledge and support to make this maintenance easy.

 

SL&C Raw Material Suppliers (also competitive manufacturers with private labeling):

 

·         DuPont

·         PPG

·         Bayer Material Science

·         Sherwin Williams

·         DOW

·         Eli Lilly & Company

·         Union Carbide

Concord Plaza, Wilmington, DE

One PPG Place Pittsburgh, PA

100 Bayer Boulevard, Whippany, NJ

101 W. Prospect Ave., Cleveland, OH

2200 W. Salzburg Road, Auburn, MI

Lilly Corporate Center. Indianapolis, IN

1254 Enclave Pkwy, Houston, TX

1-302-774-1000

1-412-434-3131

1- 862-404-3000

1-800-474-3794

1 989-636-1000

1-800-545-5979

1-281-966-2016

For reviews on other major spray lining franchise businesses, click on Franchise Reviews or select this link to download The Complete Spray Lining Franchise Review Guide.

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Average rating:  
 4 reviews
SLC matched then beat Line-X

Mike, Advanced Lining Coating Svc owner proved to me with MSDS, drum labels and truck beds he done that SLC is thicker & stronger than Line-X. Got F-250 6 1/2 ft bed done for $485 with manufacture-backed, lifetime Unconditional Warranty. No other bedliner guys near Beaumont Texas offer that.

Best quality and support from Spray Lining

I had a dealership with Speedliner before, and I have to say that this was a much better dealership option. The cost is reasonable and the quality of materials along with the 24x7 support from Spray Lining and Coatings is fantastic. You can't go wrong with them.

Best dealership around

I read a lot about all the big players in the spray lining business, and SL&C has them all beat. The reviews here and on the Spray Lining Vendor Reviews Guide were a great help. I called the other guys, and the info here was spot on. Just signed up for a dealership, and already getting some business right after certifying.

SL&C was the best choice

I have been a Spray Lining and Coating dealer now for 2 years, and it was the best choice for my needs. They are always there to help me with any technical issues and even help me price jobs when I need.


Leave a Reply

Your email address will not be published. Required fields are marked *